Download AMP1-16 Series User Guide

Transcript
C h a p t e r 4 I n t e rn a l M e n u S y st e m
Meter Segment Menu
Meter Segment Menu
On the Meter Segment Menu, you can customize your level meter
segments thresholds and colors.
Figure 4–7
Meter Segment Menu
Meter Segment Menu
Upper
Segment
-20 dBFS
Middle
Segment
-30 dBFS
0
-10
23
Upper Color
19
Middle Color
13
Lower Color
-20
Set Default
-30
Press a Segment or Color
button and then turn the
Trim control to adjust.
-40
-50
-60
Back
Next
To quickly exit these Menus,
press Trim for 3 seconds
• Upper Segment: Pressing this button and than rotating the Trim
knob adjusts the division between the upper and middle segments.
You can adjust the color boundary in 1 dBr increments, and it has
the same range as the bottom and top limits of the meter.
• Middle Segment: Pressing this button and than rotating the Trim
knob adjusts the division between the middle and lower segments.
You can adjust the color boundary in 1 dBr increments, and it has
the same range as the bottom and top limits of the meter.
• Default: Pressing this button changes the settings on this menu
and on the Meter Type and Reference Menu back to the factory
settings for the chosen scale type.
• Upper, Middle, and Lower Color: Pressing this button and then
rotating the Trim knob cycles the upper, middle, or lower color of
the displayed sample level meter color through a wide variety of
colors.
34
821189:
A M P 1 - 1 6 - M U s er G u i d e
© 2 0 1 2 Wo h l e r Tec h n o l o g i e s , I n c. A l l r i g h t s r e s er ve d .