Download Integer Arithmetic IP Cores User Guide
Transcript
UG-01063 2014.12.19 ALTMULT_ACCUM Parameters 8-13 Table 8-7: ALTMULT_ACCUM Megafunction Parameters (Arria V, Cyclone V, and Stratix V Devices Only) Parameter Name Type Required Description INPUT_ACLR_C0 String No Specifies the asynchronous clear for the datac[] operand of the first multiplier. Values are ACLR0 and ACLR1. If omitted and corresponding INPUT_ REGISTER_C[] is used, the default value is ACLR0. The value for INPUT_ACLR_C0 must be set similar to the value of INPUT_ACLR_A0. INPUT_ACLR_C1 String No Specifies the asynchronous clear for the datac[] operand of the second multiplier. Values are ACLR0 and ACLR1. If omitted and corresponding INPUT_ REGISTER_C[] is used, the default value is ACLR0. The value for INPUT_ACLR_C1 must be set similar to the value of INPUT_ACLR_A0. INPUT_ACLR_C2 String No Specifies the asynchronous clear for the datac[] operand of the third multiplier. Values are ACLR0 and ACLR1. If omitted and corresponding INPUT_ REGISTER_C[] is used, the default value is ACLR0. The value for INPUT_ACLR_C2 must be set similar to the value of INPUT_ACLR_A0. INPUT_ACLR_C3 String No Specifies the asynchronous clear for the datac[] operand of the fourth and corresponding multiplier. Values are ACLR0 and ACLR1. If omitted and corresponding INPUT_REGISTER_C[] is used, the default value is ACLR0. The value for INPUT_ ACLR_C3 must be set similar to the value of INPUT_ACLR_ A0. ALTMULT_ACCUM (Multiply-Accumulate) Send Feedback Altera Corporation