Download User manual
Transcript
PTZ control Pattern settings Patterns are defined tours from position to position that are accessed in sequence on the PTZ camera. Patterns are recorded almost live. The system saves the parameters used whilst you move and adjust the cameras in sequence to the corresponding positions at a defined speed. • Select PTZ in the menu and click on Pattern Settings: 1. Click on Rec Pattern to start the pattern recording. 2. Using the control panel, adjust the camera position and settings that you wish to record as a pattern. 3. The recording is made until you right-click to finish the recording. Note 22 • Start the recorded pattern by calling up the pop-up menu (right-click in the live view of the PTZ camera). • Click on Set Pattern and click on the desired pattern. The PTZ camera now starts moving to the individual positions. After running through the entire pattern, the process is started again.