Download Operating Instructions - SEW
Transcript
Safety Notes 2 Installation / assembly Observe the instructions in the sections "Installation" and "Assembly/Removal"! Startup / operation Check that the direction of rotation is correct in decoupled status. Listen out for unusual grinding noises as the shaft rotates. Secure the shaft keys for test mode without drive components. Do not render monitoring and protection equipment inoperative even for test mode. Switch off the gearmotor if in doubt whenever changes occur in relation to normal operation (e.g. increased temperature, noise, vibration). Determine the cause; contact SEW-EURODRIVE if necessary. Inspection / maintenance 8 Follow the instructions in the section "Inspection and Maintenance"! Operating Instructions – Gear Unit, R..7, F..7, K..7, S..7 Series, SPIROPLAN® W