Download Operating Instructions

Transcript
Chapter 4 Settings - [PICTURE] menu
2) Press qw or the <ENTER> button.
ff The [RGB/YPBPR] or [RGB/YCBCR] individual adjustment screen is displayed.
3) Press qw to switch the item.
ff The items will switch each time you press the button.
[AUTO]
The sync signal automatically selects the signal [RGB] / [YPBPR] / [YCBCR].
[RGB]
Select it for RGB signal input.
[YPBPR]
Select it for YPBPR signal input.
[YCBCR]
Select it for YCBCR signal input.
When the <COMPUTER 1 IN> / <COMPUTER 2 IN/1 OUT>*1 terminal is selected
ffFor 525i(480i), 625i(576i), 525p(480p) and 625p(576p) input
Select [AUTO], [RGB] or [YCBCR].
ffFor other movie-based signal input
Select [AUTO], [RGB] or [YPBPR].
*1 When the <COMPUTER 2 IN/1 OUT> terminal is used as <COMPUTER 2 IN> terminal
When the <HDMI 1 IN> / <HDMI 2 IN> terminal is selected
ffFor 525p(480p) and 625p(576p) input
Select [AUTO], [RGB] or [YCBCR].
ffFor other movie-based signal input
Select [AUTO], [RGB] or [YPBPR].
Note
ff Refer to “List of compatible signals” (Æ page 111) for the signal details.
ff The signal selection may not function properly depending on connected devices.
54 - ENGLISH