Download COFFEE Core USER MANUAL

Transcript
1.2.
Interfacing coprocessors
Table 1.2 Coprocessor interfacing signals.
Signal
COP_EXC[3..0]:
Direction
from the
core side
In
Purpose/description
when active
Coprocessor exception.
COP_EXC(3) – COP 3
Coprocessor can interrupt the
COP_EXC(2) – COP 2
core by activating this signal.
COP_EXC(1) – COP 1
COP_EXC(0) – COP 0
COP_PORT(40):
out
WR_COP
COP_PORT(39):
coprocessor register file.
out
RD_COP
COP_PORT[38..37]:
Write to cop. Write access to
Read from cop. Read access to
coprocessor register file.
out
C_INDX
Coprocessor index used to
address one of the four possible
coprocessors
COP_PORT[36..32]:
out
R_INDX
Register index used to select the
right register from the accessed
coprocessor register bank.
COP_PORT[31..0]:
inout
Data to/from the coprocessor.
in
Freezes the whole core! This
DATA
stall
signal does not strictly speaking
belong to coprocessor interface
but can be used if no other
solution is available.