Download GRAPHISOFT EcoDesigner User Guide

Transcript
Working with EcoDesigner
Obviously, the more detailed the model, the more accurate selections can be made. If external walls are modeled using
separate ArchiCAD wall elements for segments under and above the ground, for example, as with execution drawings,
then they can be marked more accurately than on the draft model.
Wind Protection
Choose the Wind Protection option that best describes your building’s wind exposure: Protected, Partly Protected or
Unprotected.
Surroundings
Choose the Surroundings option that best describes the environment of your building: Waterfront, Garden or Paved.
This setting determines the level of indirect radiation that bounces back from these surfaces and reaches the building
shell.
Facade Shadings
EcoDesigner for ArchiCAD 15 does not automatically
determine the extent to which shadows are cast on each
elevation of the building. Use the Facade Shadings button to
activate a separate dialog with a list of those sides of the
building that receive the sunlight (the list of Orientations can
vary depending on project location).
For each orientation, choose the options that best describe
the amount of shading resulting from:
•
External objects (choose an option - Not shaded,
Slightly shaded, Shaded or Very shaded - from the
Shading column)
•
Vertical shadow-casting edges (choose an option - Plain, Average or Complex - from the Complexity column)
•
Horizontal shadow-casting edges (choose an option - None, Small or Large - from the Roof Canopy column)
GRAPHISOFT EcoDesigner User Guide
41