Download NXC2500 User's Guide
Transcript
Chapter 5 Monitor Table 24 Monitor > System Status > Traffic Statistics (continued) LABEL DESCRIPTION Sort By Select the type of report to display. Choices are: Host IP Address/User - displays the IP addresses or users with the most traffic and how much traffic has been sent to and from each one. Service/Port - displays the most-used protocols or service ports and the amount of traffic for each one. Web Site Hits - displays the most-visited Web sites and how many times each one has been visited. Each type of report has different information in the report (below). Refresh Flush Data Click this button to update the report display. Click this button to discard all of the screen’s statistics and update the report display. These fields are available when the report type is Host IP Address/User. # This field is the rank of each record. The IP addresses and users are sorted by the amount of traffic. Direction This field indicates whether the IP address or user is sending or receiving traffic. Rx From- traffic is coming from the IP address or user to the NXC. Tx To - traffic is going from the NXC to the IP address or user. IP Address/User This field displays the IP address or user in this record. The maximum number of IP addresses or users in this report is indicated in Table 25 on page 67. Amount This field displays how much traffic was sent or received from the indicated IP address or user. If the Direction is Rx From, a red bar is displayed; if the Direction is Tx To, a blue bar is displayed. The unit of measure is bytes, Kbytes, Mbytes or Gbytes, depending on the amount of traffic for the particular IP address or user. The count starts over at zero if the number of bytes passes the byte count limit. See Table 25 on page 67. # This field is the rank of each record. The protocols and service ports are sorted by the amount of traffic. Service Port This field displays the service and port in this record. The maximum number of services and service ports in this report is indicated in Table 25 on page 67. Protocol This field indicates what protocol the service was using. Direction This field indicates whether the indicated protocol or service port is sending or receiving traffic. These fields are available when the report type is Service/Port. Ingress - traffic is coming into the NXC through the interface. Egress - traffic is going out from the NXC through the interface. Amount This field displays how much traffic was sent or received from the indicated service / port. If the Direction is Ingress, a red bar is displayed; if the Direction is Egress, a blue bar is displayed. The unit of measure is bytes, Kbytes, Mbytes, Gbytes, or Tbytes, depending on the amount of traffic for the particular protocol or service port. The count starts over at zero if the number of bytes passes the byte count limit. See Table 25 on page 67. These fields are available when the report type is Web Site Hits. 66 # This field is the rank of each record. The domain names are sorted by the number of hits. Web Site This field displays the domain names most often visited. The NXC counts each page viewed on a Web site as another hit. The maximum number of domain names in this report is indicated in Table 25 on page 67. Hits This field displays how many hits the Web site received. The NXC counts hits by counting HTTP GET packets. Many Web sites have HTTP GET references to other Web sites, and the NXC counts these as hits too. The count starts over at zero if the number of hits passes the hit count limit. See Table 25 on page 67. NXC2500 User’s Guide