Download SOB User Manual

Transcript
Software-On-Board User Manual
Routes
7-5
Step 3: Convert part of the leg north of 48° back to a Rhumb Line:
The second part of this example states that we don’t want to sail north of 48° latitude.
So select the first Turn Mark just north of this border (in our example the 7 th turn mark).
Then click the same mark again to display the
button menu, notice that this time the centre button
has changed to [GC Leg to Rhumb Line]. SOB knows
that this turn mark is part of a Great Circle leg, so
the button menu provides the choice to convert the great circle leg from this point
onwards back into a Rhumb Line, automatically deleting each GC turn mark that was
created in Step 1, up to, but not including the final point.
However, for this example it is easiest to just delete the single turn mark lying north of
the 48th parallel.
The resultant Composite Route is pictured here:
If you work this example yourself, you will find that the total Rhumb Line leg length was
4,551 Nm and became 4,322 Nm for the GreatCircle/Composite equivalent. A saving of
229 nautical miles or 424 kilometres.
Rel 4:Jan 2011
www.digiboat.com