Download BROOKFIELD DIGITAL VISCOMETER MODEL DV
Transcript
Appendix C - Spindle and Model Codes Each spindle has a two digit code which is scrolled via the select knob on the DV-E. The spindle code directs the DV-E to calculate viscosity for the spindle that is being used. The spindle multiplyer constant (SMC) is used to calculate full scale viscosity range for any spindle/speed combination (refer to Appendix D). Spindle codes are listed in Table C-1. Table C-1 SPINDLE RV1 (optional) RV2 RV3 RV4 RV5 RV6 RV7 HA1 (optional) HA2 HA3 HA4 HA5 HA6 HA7 HB1 (optional) HB2 HB3 HB4 HB5 HB6 HB7 LV1 LV2 LV3 LV4 LV5 SPIRAL CODE 01 02 03 04 05 06 07 01 02 03 04 05 06 07 01 02 SMC 1 4 10 20 40 100 400 1 4 10 20 40 100 400 1 4 03 04 05 06 07 61 62 63 64 65 70 10 20 40 100 400 6.4 32 128 640 1280 105 Brookfield Engineering Labs., Inc. SPINDLE T-A T-B T-C T-D T-E T-F ULA DIN-ULA TSEL-DIN-81 SSA-DIN-82 SSA-DIN-83 ULA-DIN-85 ULA-DIN-86 ULA-DIN-87 SC4-14 SC4-15 SC4-16 SC4-18 SC4-21 SC4-25 SC4-27 SC4-28 SC4-29 SC4-31 SC4-34 SC4-37 Page 17 CODE 91 92 93 94 95 96 00 85 81 82 83 85 86 87 14 15 16 18 21 25 27 28 29 31 34 37 SMC 20 40 100 200 500 1000 0.64 1.22 3.7 3.75 12.09 1.22 3.65 12.13 125 50 128 3.2 5 512 25 50 100 32 64 25 Manual No. M/98-350-E1203