Download Cable Gate Installation Manual

Transcript
v
Introduction
This manual is intended for authorised Cable Gate installation teams. The manual contains the
following sections:
Section 1: Preparation for Installation– collecting information about the site and making
arrangements for the installation.
Section 2:Tools and Equipment – Lists of tools and equipment required for Day One and Day
Two.
Section 3:Cable Gate Installation Procedure – How to install the Cable Gate and associated
operating systems.
Section 4:Access Control Equipment - Outlines the functionality of common Access Control
devices and their typical connections into the cable gate control module.
Section 5:System Wiring And EMC Issues – Placement of ferrites to meet C-Tick radiated
emissions requirements
Section 6:Control Module Configurable Parameters – How to configure the operation of the
Cable Gate.
Section 7:Engineering Drawings / Data In this manual, the words WARNING and CAUTION are used to mean the following:
WARNING
This heading means that the information that follows is provided to protect people from
injury.
CAUTION
This heading means that the information that follows is provided to protect equipment
or property from damage.
Document No. 13-01 (CONFIDENTIAL – Matilda Products Limited Copyright © 2004)
Cable Gate Installation Manual (Revision 0.2)
July 2004