Download ComNav Installation Manual

Transcript
3. Configuring the Hills ComNav
Using xConnect
Using a VoiceNav code pad
To enable Zone Doubling using xConnect.
To enable Zone Doubling using a VoiceNav code pad.
1.
Launch xConnect
2.
Enable Zone Doubling
Tap the “Network” button at the bottom of the xConnect app. If you do not see the
“Network” button, tap the “More” button to show further options.
Tick the “Enable Zone Doubling” box.
Tap “Save Config”.
1.
menu
3.
4.
5.
6.
7.
selects advanced system
configuration
0
Your 4 or 6 digit installer code
2.
Configuring the Hills ComNav
Configuring the Hills ComNav
3. Configuring the Hills ComNav
the Service LED will flash
selects Panel and Device
configuration
2
1
9
1
1
menu
enter
connects to device 191 (ComNav)
enable Zone Doubling
OFF=Single zone
ON=Zone Doubled
return to feature selection
enter
menu
menu
menu
exits from advanced system
configuration
Using a standard code pad (Vertex, Icon or LCD)
To enable Zone Doubling using a standard code pad.
1.
2.
3.
Diagram 20: xConnect - Zone doubling
4.
5.
6.
34
*
selects advanced system
configuration
8
Your 4 or 6 digit installer code
1
9
1
#
1
*
exit
1
#
the Service LED will flash
connects to device 191 (ComNav)
The Armed LED will be solid and the
Service LED will flash
ComNav features
*
exit
*
enable Zone Doubling
OFF=Single zone
ON=Zone Doubled
exits from advanced system
configuration
35