Download PowerLogic User's Guide - Electrical and Information Technology

Transcript
Setting Layers
Electrical Layers Area
Lets you to increase the number of electrical layers and reassign data from one layer to
another. Choose the Increase or Reassign button.
Thickness
Opens the Layer Thickness dialog box where you can define layer and substrate thickness
and dielectric information. The Electrodynamic Checking module, EDC, uses this
information.
Layer Thickness Dialog Box
Use the Layer Thickness dialog box to define layer and substrate thickness and dielectric
information. The Electrodynamic Checking module, EDC, uses this information. To open
this dialog box:
1. Choose Setup/Layers.
2. Choose the Thickness button. The electrical layers plus the substrate/prepreg layers
between the electrical layers appear in the list box.
Layer List
Lists the layers for which you can define substrate, prepreg, or copper laminate thickness.
Layer Type
The Layer Type for the selected copper laminate layer is displayed here.
Copper Thickness
Sets the Copper Thickness on the selected copper laminate layer. This option grays when
a substrate layer is selected.
PowerLogic User's Guide
10-20