Download International User Guide

Transcript
Chapter 6: Download/Upload Tab
11. The pump settings are displayed in the Pump Setup
screen. Check that the settings on the Pump Setup
screen are the ones you wish to upload.
12. Disconnect from the pump and put it in Suspend
mode. Align it with the wireless download cable
according to the Instructions for Use included in the kit.
Make sure the pump is suspended and the display is
notblank(“asleep”).
13. Click Upload Settings to Device. A pop up window
will appear reminding you to disconnect from and
suspend the pump but not let the display go blank
(“asleep”).ClickOK to continue.
14. When communication is established, the pump model
number and serial number will appear on the Pump
Settingsscreen.Aprogressbarandtextwilldisplaythe
download/upload progress.
Pump Serial
Number
Pump Model
34