Download POLLUTEv7 User's Guide
Transcript
Editing Layer Data The program will detect grossly unreasonable results and automatically repeat the calculation with the values suggested above, in this circumstance the value of RNU is limited to 40. Editing Layer Data To edit the layer data either select the Layer Data menu item from the Data Entry menu or click on a layer on the screen. The Layer Data form below will be displayed. This form has two tabs, one for entering the data for the layer and the other for selecting a symbol for the layer. If the layer is fractured, a third tab will appear for the fracture data. Layer Data Tab The following data can be edited on the Layer Data tab: Name: This is the name of the layer. It is used only for drawing. Number of Sublayers: The number of sublayers in each layer is primarily used in the output of the calculated concentrations with depth; a concentration will be calculated at each sublayer interface. If the Freundlich Non-Linear Sorption, Langmuir Non-Linear Sorption, or Variable Properties Special Feature is selected, the accuracy of the results will depend on the number of sublayers. POLLUTEv7 Reference Guide 58