Download User's Manual

Transcript
formula, see Models / Coded Equations. If both options are selected,
this one is over-ridden.
OTHER MODEL FEATURES
19.
The selectable model features are conditional variances (ARCH/GARCH),
coded functions, regime switching, equilibrium relations, and constraints.
Select these features to be included in the model with the checkboxes at the
lower left side of the dialog.
20.
If a feature checkbox is "greyed out" (disabled) this means that the feature is
unavailable with current settings, usually choice of estimator. For example,
conditional variance models need an ML estimator to be selected.
Also, "Coded Function" is greyed out if coded equilibrium relations are
specified in the Equilibrium Relations dialog. For this case the Coded
Function dialog is dedicated to specifying equilibrium relations.
21.
Model features generally require options to be set in the corresponding
dialogs to be active. It is not possible to select a feature with the checkbox,
unless some model options have been set.
22.
Click the square buttons to the left of the checkboxes to open the
corresponding dialogs. If options are set, these buttons are highlighted. The
dialogs can also be opened from the Model menu.
23.
NOTE: Values dialog(s) corresponding to model features (equilibrium
relations, switching regimes) are not accessible unless the feature is checked.
24.
To compute a Wald test as part of the run, as well as to estimate subject to
constraints, the "Parameter Constraints" box must be checked. Wald tests
can also be performed separately, see Actions / Compute Test Statistics /
Wald Test.
SYSTEMS OF EQUATIONS
25.
Select system estimation by checking the "System of Equations" checkbox.
26.
When a system of equations is specified, the estimator computed depends
on the estimator selection.
*
If the option "LGV/FIML" is selected, the log-determinant of the
error covariance matrix is minimized (Least Generalized Variance),
or FIML in the simultaneous equations case (see 22 below). In these
cases, the covariance parameters are concentrated out, and do not
appear in the vector of parameters.
*
If the option "IV/2SLS/GMM/3SLS" is selected, the estimation
method is system GMM with the instruments selected. If the
estimation is launched with the Actions / Run Estimation commands
or the "Run" button, the error covariance matrix set equal to the
identity matrix. However, if the command Actions / Multi-Stage
GMM is given twice in succession, the second run uses the efficient
weights matrix estimated from the current residuals. This iteration
64
© James Davidson 2008