Download Installation Manual

Transcript
IM748ES
Panel Answer Options:
(Address 003)
SECTION 00
The first digit entered disables the “Answering Machine Override” (key [2ND] or key [1]), or determines
the period of time between first and second call.
The second digit entered determines the number of rings required before the panel will answer.
If [2ND][2ND] is entered, the panel will not answer. (Default value is [2ND] [8].)
Panel Identifier:
(Addresses 004-005)
SECTION 01
This four digit code identifies the control panel to the PC before uploading can be initiated. Each pair of
code digits has its own memory address. There is no default code. Any hexa digits from 00 - FF can be
entered. Program first 2 digits in address 004 and second 2 digits in 005.
Related features: "Panel Answer Options" 003
"Call back" 086, [4]
PC Password:
(Addresses 006-007)
SECTION 01
This four digit download password identifies the PC to the panel, prior to beginning the programming
download process. Program the first 2 digits in address 006 and the second 2 digits in 007.
Telephone and Account Numbers
Three telephone numbers can be programmed: a PC telephone number and two central station numbers.
Each number can contain a maximum of 16 digits. Special instructions can be entered in the telephone
numbers using the following keys:
[10]
= the number "0"
[BYP] = switch from pulse to tone while dialing
[MEM] = pause 4 seconds
[11]
=*
[12]
=#
[TRBL] = end of number
If only one central station telephone number is available, the same telephone number must be programmed for telephone number 1 and 2. A separate "communicator reporting" format can be selected for
each central station telephone number at address 038.
Computer telephone number:
(Addresses 008-015)
SECTION 02 - 03
The PC download telephone number is dialed in three situations. It is dialed when communication with
PC is initiated from the keypad. It is the automatic "call back" number, when the "call back" feature is
enabled (086, [4] "on"). If the event buffer is ready to report, and "automatic event buffer transmission"
feature is enabled (088, [2ND] "on"), this number will be dialed in order to download the event list.
Related features: "Panel Identifier" 004-005
"PC password" 006-007
"Call back" 086, [4]
Central station telephone number 1
Central station telephone number 2
(Addresses 016-023)
SECTION 04 - 05
(Addresses 024-031)
SECTION 06 - 07
The panel can communicate with two central station numbers. Each of the numbers can be assigned a
separate reporting format.
Related features: "Communicator Formats" 038
"Reporting options" 086, [11] and [12]
Espload note: Upon alarm, upload/download in progress will be interrupted and the panel will call the central.
12