Download Beta - Meaweb
Transcript
The optical chamber can be vertically adjusted by sliding on accurate, noiseless plastic blocks and, balanced by a spring, is mounted in a sheet metal covering, where a centimetre scale is available for perfect placement compared to the headlight. The digital display allows easy reading of light intensity. The viewer that makes it easier to align the equipment with the vehicle can be supplied either as a mirror device, or with a laser beam. GENERAL SAFETY RULES The rules below must be strictly followed, to prevent the operator from being harmed and the machine from being damaged. – Read the labels on the device; do not cover them for any reason, and replace them immediately, in case they should get damaged. – The device may be used by authorized, trained personnel only. – Do not use the device in an explosive atmosphere. – The work environment must be dry and adequately ventilated. – While handling the device, be careful not to hurt other people and, above all, children. – Do not hit any shelving systems or scaffolds where any objects might fall, as you may be harmed and the device may get damaged. – The storage temperature must range between -5 °C and +55 °C. – The working temperature must range between +5 °C and +45 °C. – Use a suitable exhaust gas suction system, as the headlight test must be performed with the engine running. Accidental inhalation of carbon monoxide may cause severe harm to the body, sometimes with fatal consequences. Please contact your area agent, who will recommend the system that suits your company best. – Do not leave the headlight tester under sunlight or in close proximity to hot objects, including stoves and radiators. – Do not leave the headlight tester under the rain or in an excessively humid place; the electronic circuits would get damaged. – Cover the headlight tester, if it is not going to be used for a long period of time. – The headlight tester contains a battery; misusing such batteries involves a risk of fire or explosion. To prevent such risks, do not heat, or use any naked flames towards, the battery and, if it should need replacing, use