Download Operating Instructions

Transcript
SYSTEM DESCRIPTION
Type systematics
1)
2)
Type
no.
Type
End value range
Qnom (lN/min)
referred to air / N2
Sensor
8626
MFC
25 ... 1500
Inline
8006
MFM
25 ... 1500
Inline
Remarks
for devices from
Jan. 2003 1)
for devices from
Jan. 2003 1)
8716
MFC
25 ... 1500
Inline
8706
MFM
25 ... 1500
Inline
8712
MFC
0.02 ... 50
Bypass CMOSens® 2)
8702
MFM
0.02 ... 50
Bypass CMOSens® 2)
8710
8700
MFC
MFM
0.05 ... 30
0.05 ... 30
Bypass standard
Bypass standard
Please observe in this connection the note on the device types 8626 / 8006 in the section Connection
Configuration Type 8626/8006.
CMOSens® is a registered trademark of Sensirion AG (Switzerland)
General function
The MFCs of Types 8626, 8716, 8712 and 8710 are compact devices with which
the mass flow of gases is controlled. They control to a preset setpoint value,
independent of disturbances such as pressure variations or flow resistances that
vary with time, e.g. as a result of filter contamination.
The MFCs contain the components flow rate sensor (Q sensor), electronics (with
the functions signal processing, control and valve drive), and a proportional
solenoid valve as the servo component.
xout
y
w
xd=w-x
x
controller
p
Q sensor
servo
component
Fig.: Components of a Mass Flow Controller
MFC/MFM - 5
english
These Operating Instructions contain information for the following Mass Flow
Controllers (MFC) and Mass Flow Meters (MFM) from the Bürkert product range: