Download MG40 Series

Transcript
●Subnet mask
This function is used to set and acquire the subnet mask.
The value which has been set is reflected the next time the system is started up.
When the subnet mask is acquired after its setting has been changed, the subnet mask set before the change
is reflected will be acquired.
Setup
mode
Set
Ethernet
The command sets the subnet mask.
Command format
NSM=<Subnet mask>
<Subnet mask>
Return format
Target
Save setting values
Examples of use
Compatible command
0.0.0.0 to 255.255.255.255 (Factory setting: 255.255.255.0)
Execution results
MG41 main unit
Setting values saved. (The setting values are saved at the same time as the setting
command is executed.)
Transmission : NSM=255.255.0.0
Return
: OK000
None
Setup
mode
Acquire
Measurement
mode
Ethernet
The command acquires the subnet mask.
Command format
Return format
NSM?
NIP=<Subnet mask>
<Subnet mask>
Target
Examples of use
Compatible command
4-38 (E)
0.0.0.0 to 255.255.255.255
MG41 main unit
Transmission : NSM?
Return
: NIP=255.255.255.0
None
MG40 Series