Download Pando - The Lightworks

Transcript
EXTERNAL Motor Version
Flue diameter in mm
Aspiration UNE-EN-61591
min. /max.. (m³/h)
Noise level UNE-EN 60704-2-13
Min. / Max Lp (dBA)
Motor power consumption in watts
Recommended Ducting instalation
(maximum)
EXTERNAL Motor Version
Flue diameter in mm
Aspiration UNE-EN-61591
min. /max.. (m³/h)
Noise level UNE-EN 60704-2-13
Min. / Max Lp (dBA)
Motor power consumption in watts
Recommended Ducting instalation
(maximum)
V.1200
FALSE
CEILING
EXT - Ø150
280/1000
V.1400
FALSE
CEILING
EXT - Ø150-200
320/1173
V.1800
FALSE
CEILING
EXT - Ø200
300/1500
45/62
41/57
45/69
265W
355W
Available on Type 1.
Up to 11 linear m.
Up to 5 lineal
Max distance from
meters, motor to Hood 4 m.
max distance from
hood to motor 2m
without elbows
500W
Available on Type 1.
Up to 9 lineal
meters,
max distance from
hood to motor 4m
without elbows
V.2100
FALSO
TECHO
EXT - Ø200
380/1716
V.2500
FALSO
TECHO
EXT - Ø200
380/2100
55/69
56/70
330W
up to 11 linear m.
Max distance from
motor to Hood 4 m.
280W
Recommended
minium distance
from hood to motor
is 4 m.
It is advised the use
of SEC ductwork
(optional)
Notes:
Minimize number of curves along the ducting, since each one significantly reduces airflow capacity:
For Ø 150mm 90º equals 1 linear meter
For Ø 200mm 90º equals 2,5 linear meter
Ex. Before 2 x 90º, total ducting length for 3 linear meters results on Ø 150 mm 5 meters
Ex. Before 2 x 90º, total ducting length for 3 linear meters results on Ø 200 mm 8 meters
***In high-powered motor systems, V2300 and V2500, the minimum distance between hood and
motor must be 4m, with between 4 and 6m recommended. If it is fitted any nearer, this may cause
problems with high noise levels. It is also recommended that motors of this type be fitted with a
SEC soundproof flue (not included as standard, optional, consult distributor).
EN
- 15 -