Download Mirolin
Transcript
STEP 25: Insert Short Bottom Sweep Gasket Seal (15) onto the Door Panel (8) bottom glass as shown. STEP 26: Insert the Door Handle (7) into the two predrilled holes on the Door Panel (8). Reference Detail View III - Handle Assembly (7) on page 4 of Exploded View. Short Bottom Sweep Gasket Seal STEP 27: Screw Door Handle (7) onto the door handle studs. STEP 28: Install Magnetic Strips (10) on the Door Panel (8) and adjoining Fixed Panel. Note: Start at the top and work down. STEP 29: Notch the rigid section of the Magnet Strip (10) to match with the Bottom Gasket Seal (16) properly. STEP 30: The Magnet Strip (10) should line up as shown. Close the door and check the magnet alignment. 9