Download eps-dual 2.0.pptx

Transcript
Conecte el cable RF que viene desde la centralita a la antena del sensor.
Aplicar un trozo de material de pegado en la conexión realizando una
fuerte presión para que quede bien fijado en el paragolpes (si la
temperatura es inferior a 10ºC se recomienda calentar tanto el material
de pegado como la zona donde tiene que fijarse) Fig.5
Connect
the RF Cable
coming from the ECU
the antenna
sensor. Apply
piece of sticking
Vuelva amaterial
colocar
el paragolpes
y totire
del cable
RF ahacia
el interior del
on the connection and fix it on the bumper by a strong pressure (If the ambient temperature
is below
10 °C we recommend
heating bothsólo
the mastic
the sticking area on the bumper). It
maletero,
dejando
en el exterior
lo and
imprescindible.
isnecessary to use the same material to fix the opposite extremity of the antenna. (Fig. 5).
Replace the bumper and pull the RF Cable inside the luggage compartment or engine compartment
in order not to leave excess cable outside.
Sticking material
Material de pegado
Cable RF
RF cable
Fig. 5
Fig. 5
Pag. 7