Download Tabla de contenido
Transcript
Driver Controls Power down back window To operate the power down back window, the ignition switch must be in the on or accessory position (or with accessory delay power enabled). The power down back window only has three window position selections: • Fully open • Vent • Fully closed control to Press and release the open window to the vent position. Press and release the control again to open window to the full open position. Pull and hold the close the window. control to WARNING: When operating the power sliding back window you must ensure all rear seat occupants and/or cargo are not in the proximity of the back window. WARNING: Do not leave children unattended in the vehicle and do not let children play with the power sliding back window. They may seriously injure themselves. Normal operation When the power down back window is opened, it will stop in the vent position. When the window is closed from full open, it will not stop in the vent position. When the power down back window is in motion, the control switch can be pressed to change the window direction and move it to the closest position. If the power down back window is moving up and the ignition is switched to off (without accessory delay power enabled) the window will reverse direction and move down to either the full open or vent position. If the window is within 0.16 in. (4 mm) of the upper header, it will completely close. 75 2009 07+ Explorer Sport Trac (esp) Owners Guide, 1st Printing USA (fus)
Related documents
Ford 2008 F-250 Automobile User Manual
Ford 2009 F-250 Automobile User Manual
Ford 2009 Expedition Automobile User Manual
Ford 2010 Explorer Automobile User Manual
EverFocus 7016S DVR User Manual
Tabla de contenido
Ford 2007 Explorer Automobile User Manual
Ford 2009 E-150 Automobile User Manual
Mercedes-Benz 2008 E320 Automobile User Manual
Tabla de contenido
Tabla de contenido
Lincoln 2008 Mark LT Automobile User Manual