Download safety instructions - Operator`s Manual
Transcript
SAFETY INSTRUCTIONS This attachment is intended to be installed on a RG5500 Reel Grinder and should be used to raise or lower cutting units ONLY. Any use other than this may cause personal injury and void the warranty. ! To assure the quality and safety of your machine and to maintain the warranty, you MUST use original equipment manufacturers replacement parts and have any repair work done by a qualified professional. ALL operators of this equipment must be thoroughly trained BEFORE operating the equipment. This machine is for indoor use ONLY. Do NOT power wash machine. CONTENTS Safety Instructions/Specifications ....................................................... Page 2 - 6 Periodic Maintenance ................................................................................. Page 5 Installation .................................................................................................. Page 7 Operating Instruction .................................................................................. Page 8 Parts Lists/Exploded Views ........................................................................ Page 10 - 13 PERIODIC MAINTENANCE On a daily basis, clean the Boom and Hoist by wiping it off. On a daily basis, inspect the Boom and Hoist for loose fasteners or components. Tighten or adjust if found. On a daily basis, inspect the Boom and Hoist cable, hook and spreader assembly for any cracks, kinks, loose, worn or damaged components. Repair or replace any found. 5