Download Manual - Bosch Diagnostics

Transcript
GLOBAL OBD II WITH TOOLPAK
SYSTEM TEST
MODE F5
O2S RESULTS
SUBMODE F0
ADDITIONAL O2S INFORMATION
TID $05
Min $0A
TID $06
Min $0A
Val
Max
Val
Max
$29
$32
$16
$32
Pressing fi while the O2S RESULTS data is
being displayed will cause the tester to display
additional information about the displayed parameters. The tester displays the Test ID number
(TID) along with hexadecimal displays of the
current data value (“Val”), the ECU programmed
minimum value (“Min”) and the maximum ECU
programmed value (“Max”) for this parameter.
“Min” and “Max” are values reported by the ECU.
“Val” should be within those limits.
ACTIVE KEYS
y/n
Scroll through displayed data parameters.
º
Mark top displayed parameter as “fixed” for creating
your own data pairs; unlocks bottom parameter if
fixed.
¡
Mark bottom displayed parameter as “fixed” for creating your own data pairs; unlocks top parameter if
fixed.
£
Toggle the data descriptor line with the Parameter
Identification (PID) number and the ECU number.
¢
Toggle the data descriptor line with the Test Identification (TID) number and the oxygen bank and sensor.
fi
Toggle the data descriptor line with the Test Identification (TID) number and the hexadecimal equivalent
of the received data. The calculated value line is
toggled with the “Min” and “Max” values received
from the ECU for that TID.
•
Print data list (if equipped with serial printer).
X
Return to SELECT MODE menu.
4-27