Download Service manual

Transcript
Permobil X850
Repairs
Rear lights/indicators
Removal
1. Switch off the power supply with the On/Off key on
the control panel.
2. Remove the rear chassis cover. See page 7.
3. Divide the light’s cabling at the contact on the cabling.
This is on the inside of the rear bank of lights.
4. Remove the two screws that hold the lights in place.
See the illustration.
Figure 80. The cabling for the rear indicators and lights
are divided at the contacts on the cabling.
Figure 81. The backlights are two screws.
Assembly
Install in the reverse order.
51