Download PART 1: INTRODUCTION
Transcript
AIR INTAKE SYSTEM PART 8: MAINTENANCE AND SERVICE On/Off Fan Drives - Check the clutch operation by starting the engine when it is cold. Idle the engine at about 800 RPM. Listen for air leaks. Check that the fan is not working while the engine is warming up. When the clutch engages, note the reading on the vehicle's panel-mounted coolant temperature gauge. If the fan clutch engages at low engine temperature or cycles on and off more frequently than it should (receives "false signals"), have the problem corrected at your dealership. Air Intake System Fan Clutch / Fan WARNING! Engine fans engage suddenly without warning and can badly hurt you. Stay away from the fan when the engine is running. Your truck may be equipped with an On/Off or Viscous Fan Drive. Follow these guidelines to check your engine fan: • Check the fan assembly mounting bolts for tightness. Inspect the fan blades for damage. – 188 – Engine heat, vibration, and age combine to loosen air intake connections and cause cracks in the tubing and elbows. Leaks in the intake system allow abrasive dust to enter the engine and quickly cause expensive damage. During your daily walk-around inspection, carefully check all tubing, elbows, clamps, supports, and fasteners for condition and tightness. Under normal operating conditions, we recommend complete disassembly and cleaning of the air intake system annually. Y53-6007 (R10/06)