Download ISO Training Program (CBSPD)
Transcript
Follow the manufacturer’s instructions for cleaning. Develop procedures which include: • Sorting instruments for cleaning & decontamination. • Rinse & removal of gross soil. • Use of ultrasonic cleaner. • Mechanical washer for all hinged and metal instruments. • Manual cleaning for items with a lumen, delicate items and/or items that are moisture sensitive (eye instruments). Establish competencies for: • Processing equipment. • Insuring the temperatures and detergent concentrations are appropriate, monitored, and verified. • Each device processed per manufacturers instructions. Preventive maintenance policies for mechanical cleaning equipment should be established regardless of who is to perform the task (manufacturer, vendor, in-house maintenance). • Develop maintenance log. Policies and procedures for patient care equipment may differ from medical instruments. A specific workflow will have to be developed to include: • Soiled storage on floors, and scheduling and transport must be clearly defined. • Cleaning/disinfectant solutions as defined by the manufacturer and approved by the facility’s Infection Control Committee. • Functional inspection and repairs reported to Bio-Med. • Storage 1. Key Players: a. Manufacturers b. CS/SPD Manager/Director c. CS/SPD Technician d. Bio-Med Personnel 2. References: a. AAMI Recommended Practices: i. ST35 – “Safe Handling and Biological Decontamination of Medical Devices in Health Care Facilities and Non-Clinical Settings” ii. ST46 – “Good Hospital Practice: Steam Sterilization and Sterility Assurance” b. ASHCSP “Training Manual for Central Service Technicians” c. IAHCSMM, “Central Service Technical Manual,” Chapter 5 d. Enforcement Priorities for Single-Use Devices Reprocessed by Third Parties and Hospitals, CDRH/FDA 8/00 10