Download Operator`s Manual GTH

Transcript
First Edition - Second Printing
December 2014
Work Area Safety
Battery Safety
Electrocution Hazard
Burn Hazards
Batteries contain acid.
Always wear protective
clothing and eye wear when
working with batteries.
Avoid contact with electrical terminal.
Avoid spilling or contacting
battery acid. Neutralize
battery acid spills with baking
soda and water.
During maintenance or repair works, and while
welding, disconnect the battery by turning the cut-out
switch (see Inspection for Decals section).
Using the Charger (if equipped), be sure the device
works at 12 Volt and doesn't exceed 15 Ampere.
Explosion Hazards
Keep sparks, flames and
lighted tobacco away from
batteries. Batteries emit
explosive gas.
Employer's Responsibilities
Employers are responsible for providing a safe
work environment and for complying with local and
national governmental regulations.
Personal Safety
Be sure that everyone working on or near this machine
is familiar with the applicable safety precautions.
Part No. 57.0009.0607
GTH-5021 R
17