Download - Frank`s Hospital Workshop
Transcript
2.0 4- 4.1 Disassembly / Assembly SpaceCom General on the SpaceStation with SpaceCom 4 Remarks on Disassembly / Assembly of the SpaceStation with SpaceCom WARNING DURING DISASSEMBLY AND ASSEMBLY THE OPERATOR/SERVICE TECHNICIAN MUST WORK WITH VOLTAGES UP TO 115 / 230 V AC. THESE VOLTAGES MAY CAUSE INJURIES WHICH ARE DANGEROUS TO LIFE AND LIMB. THE NATIONAL AND INTERNATIONAL SAFETY REGULATIONS ARE TO BE ADHERED TO. THE MAINS CABLE IS TO BE REMOVED. Before disassembling the unit, the system must be checked (see „Device Check“ ➨ S. 2 - 4) to isolate the part to be exchanged. All necessary steps to disassemble or dismount the complete unit with all its subsystems and spare parts of the SpaceCom are detailed in the following description. All further disassembly- and assembly steps correspond to the SpaceStation without SpaceCom and are decribed in Chapter „Disassembly / Assembly SpaceStation“ (➨ S. 3 - 1). Steps that are not necessary can be skipped. Note Special screws for plastic housings are used in this unit. Pay attention to the corresponding notes when you fit the screws. SpaceStation, 2.0 gb 4- 1