Download TECHNICAL SPECIFICATIONS

Transcript
REQUEST FOR PROPOSALS FOR
PURCHASE AND DELIVERY OF HEAVY-DUTY BUSES
RFP 2012-MA-02
TECHNICAL SPECIFICATIONS
PAGE-52
Exterior Route and Destination
The VLU System shall integrate with destination signs to automatically display the exterior
Destination messages after operator logon.
Announcement Priority
The VLU System shall control the priority of the announcements over the speakers. The
prioritization system variable shall be managed through the server system and locally via the
Operator through the Operator Interface. This feature shall control the priority of which of the two
announcements, (live Operator announcement or the automatic announcement) gets played over
the PA system speakers, in the event that they occur at the same time. The agency shall the
ability to change the priority using the server system.
Inside Signage
The VLU System shall control and provide stop description information to the LED signs
automatically based on location based algorithms. The system shall also provide the date, time,
and Stop Requested information.
Automatic Volume Control
AVC (Automatic Volume Control) shall be provided as part of the AVA solution. AVA shall monitor
the ambient noise of the vehicle and raise and lower the volume of the automated
announcements so that it is comfortably audible over the existing noise. The announcement
volume shall be automatically compensated within a pre-defined acceptable range.
The system shall be capable of detecting ambient noise and performing AVC functions with
microphones on the inside and speakers or microphones for outside detecting. The AVC system
shall control and adjust the interior and exterior volume levels independent of one another. The
interior and exterior volumes shall have an adjustable minimum and maximum volume. The AVC
system shall adjust the volume within those set ranges. The AVC sensitivity shall also be
adjustable. The server system shall manage these adjustments and all other AVA system
parameters. Maintenance personnel shall also have access to volume adjustments on the vehicle
via the Operator Interface.
The AVC feature shall control volume levels by time of day. The agency will have the ability to
select an interval of the day to further reduce the maximum volume levels attained. This
“Commuter Volume” feature shall go into effect on the bus automatically without Operator
intervention. The “Commuter Volume” levels are managed via the server system. The commuter
time intervals shall not be fixed, but rather will be a variable of the system. This will enable the
agency to reduce volume levels during the more quiet periods of the operation. The “Commuter
Volume” levels will control the volume of both the exterior and interior announcements.
Automatic Passenger Counter Installation/Integration
The Automatic Passenger Counter controller shall be integrated with the on-board Mobile Data
Computer, based on the standard SAE J-1708/J-1587 or J-1939 VAN. Automatic Passenger
Counter sensors shall be mounted so as to avoid any protrusions into the doorway passage, with
sealed windows for the infrared beams.
Cabling to the doorway sensors shall be shielded and routed to avoid sources of electromagnetic
interference, such as fluorescent lighting ballasts. The doorway sensors and Automatic
Passenger Counter controller shall be mounted in locations that are not accessible to the vehicle
operator. The alignment of the doorway sensors shall be calibrated after installation to establish
the alignment settings for each vehicle that achieve the most accurate performance.
DECEMBER 2012