Download Mentor - crane lmi systems

Transcript
20
Calibration / Service Manual for Mentor
Please refer to table below for more values.
Voltage Values
Value displayed
displayed [mV] +/- 10mV
Pressure Transducers
300 bar, type 314
500
1500
2500
3500
4500
Angle Sensor
500
1500
2500
3500
4500
Length Sensor
500
1500
2500
3500
4500
Value
PSI
0
1088
2176
3263
4351
Bar
0
75
150
225
300
degrees
90
67.5
45
22.5
0
boom horizontal
feet
0
fully retracted
boom vertical
fully extended
If the displayed value does differ from the actual value, please refer to the following sections to find
the cause of the problem:
If the displayed angle is incorrect, please go to section Angle Sensing.
If the displayed length is incorrect, please go to section Length Sensing
If the displayed pressures are incorrect, please go to section Pressure Sensing
If the displayed slew angle is incorrect, please go to section Slewing Sensing
© 2011 Hirschmann, Chambersburg, PA 17201