Download Hemolyzer - Index of

Transcript
69
Service Manual
7.2.2. Database relating warnings
Code
Reason(s)
Message
5101
%u data
selected.
5106
No such type of data
5108
Connect an USB storage This message
device with data!
appears at View
external function.
Connect storage media into the
USB port and press
.
5109
% data record(s) will be The analyzer will
saved on an USB save %u number of
storage device.
data records.
Insert a storage device
into the USB port.
Insert USB storage media and
press
.
record(s)
is There are %u data
records present in
the database which
match the selection.
Remedy
Press
There are no %u
Press
data records present selection.
in the database
which match the
selection.
.
and check the
7.2.3. Warnings relating to QC measure
Code
5200
Message
Reason(s)
Your previous QC data When you press
will be lost.
for accepting
Are you sure?
new QC target
values.
Remedy
If you press
the new
values will be accepted and all of
the measurements on the
selected QC level will be deleted.
If you press
old values
remain
7.2.4. Calibration relating warnings
Code
5300
Message
Reason(s)
Some or all of the During automatic
calibration factors are out calibration at least
of range!
one of the factors are
out of the range 0.8
or 1.2.
Remedy
Check the target values and the
control blood and repeat the
calibration. If the problem still
persists contact the Service
Personnel.