Download 1640E Operator`s Manual
Transcript
WARNING Check that the work area is clear of people and obstacles. Always look in the direction of travel. Highway Travel If it becomes necessary to move the loader a long distance, obtain and use a properly rated trailer. For short distance highway travel, attach an SMV (Slow Moving Vehicle) emblem (purchased locally) to the back of the loader. For highway operation, obtain and install dual amber flashers or a strobe light. Check state and local laws and regulations. Lifting the Loader The loader can be lifted using the (optional) four-point lift kit. WARNING • • • • Before lifting, check the lift kit for proper installation. Never allow riders in the operator’s compartment while the loader is lifted. Keep everyone a safe distance away from the loader while it is lifted. Loader may only be lifted with an empty bucket or empty pallet forks, or with no attachment. Never lift the loader with attachments other than those stated. Lift equipment used and its installation is the responsibility of the party conducting the lift. All rigging MUST comply with applicable regulations and guidelines. 1. Using suitable lift equipment, hook into the lift eyes. Adjust the length of the slings or chains to lift the loader level. Note: The loader my be slightly off level (10 degrees max.) when lifted. 2. Center the hoist over the ROPS/FOPS. To prevent shock loading of the equipment and excessive swinging, slowly lift the loader off the ground. Perform all movements slowly and gradually. As needed, use a tag line to help position the loader and keeps it from swinging. Storing the Loader If the skid-steer loader is to be stored for a long period of time, the following procedure is suggested: 1. Fully inflate the tires. 2. Lubricate all grease zerks. 3. Check all fluid levels and replenish as necessary. 34 917388/BP0310