Download 9 - flowsic600

Transcript
General
FLOWSIC600
Software Manual
Ultrasonic Gas Flow Meter
2.1.5
Installing the software driver for the interface adapter
Note
The interface adapter can only be used on PCs which run under the operating systems
Windows 98, Windows 2000, Windows XP.
– Plug in the USB connector at the PC.
– The operating system will signal to have found new hardware. Insert the FLOWSIC600
CD ROM which is included in the delivery and follow the installation assistant (see Fig.
2.4).
– After completion of the installation, a second installation will be performed for software
reasons. This second installation must not be interrupted -- please follow the assistant
again.
Fig. 2.4: Installing the driver
12
© SICK MAIHAK GmbH · Germany · All rights reserved
8 010 543 / 03-2007