Download Network Communications Manual

Transcript
Networking Alpha® Signs
Wireless network—transceiver
A wireless network is an effective choice when:
•
the cost of a wired connection is too expensive,
•
the sign is at a greater distance than is recommended,
•
you cannot physically run wiring to the sign’s location, or
•
the signs may frequently change location.
Wireless networks allow you to transfer data between PCs and signs that are not physically
connected. A PC communicates with one or more signs through a transceiver (transmitter/receiver). One
transceiver at the PC (the master transceiver) transmits messages to a second transceiver (the remote
transceiver) in or attached to a sign located elsewhere.
There are two types of wireless networks:
•
LAWN (Local Area Wireless Network)
•
WAWN (Wide Area Wireless Network)
Adaptive Micro Systems does not provide wireless messaging hardware or technical communication
services for most Alpha® indoor signs. If you are interested in this type of network, we recommend you
visit the following Web sites for more information:
•
WaveWare Technologies (http://www.wirelessmessaging.com)
•
Reach Wireless (http://www.reachwireless.com)
•
Metrocall/DirectView (http://www.metrocall.com/directview)
Alpha sign
Alpha sign
Alpha sign
2
Network overview