Download vehicle explorer help

Transcript
Obviously, to disconnect from a wireless network, click the Disconnect button in the lower right corner.
Upon disconnection, the button's text changes from Disconnect to Connect. This does not need to be
performed on every boot of the computer. Leaving it connected to the ROVACOM PRO network will make
it reconnect to this network automatically the next time it is switched on.
Whilst on the topic, we guide you through some of the advanced settings which should NOT be ventured
into unless absolutely necessary.
Click Change advanced settings which are in the left column of the above screenshot. The Wireless
Network Connection Properties dialog will appear and by default you are on the General tab. Switch to
the Wireless Networks tab by left clicking on it once. Make sure that the very first option on this tab Use
Windows to configure my wireless network settings is checked. Next, select ROVACOM PRO (Automatic)
from the list of preferred networks and click the Properties button.
You are now on the Association tab of the ROVACOM PRO properties dialog. Here we must have two
options enabled and everything else should be greyed out. Network Authentication should be set to Open
and Data encryption should be set to Disabled. Now switch to the Connection tab by left clicking on it
once. Here, the only option Connect when this network is in range must be checked.
Click OK twice to save the changes
3.2.2 Fan Replacement
As an owner / user of a ROVACOM PRO server you will appreciate that there is a fan fitted inside it for
cooling. Traditionally we do not like to use active cooling, preferring passive cooling due to our desire to
keep everything solid state (no moving parts) if possible. Without any moving parts there is nothing to
wear out and so the unit will be maintenance free for life. A fan however, traditionally requires servicing