Download 20612 IC core section
Transcript
20612 IC core section 9/24/01 TM 12:15 PM Page 12 TAILPIECES TM Because of the location of the ChoICe™ Plus activating mechanism, and the HS sidebar, all tailpieces require one shorter leg. Old style tailpieces will operate other levels of ChoICe™. H SERIES KNOB: H SERIES KNOB: For all functions except 15 and 19 functions For 19 function only CH -66 H6 6 PINS H69 H7 6 PINS 7 PINS CH6-44 S SERIES KNOB: For all functions except 15 and 19 functions For 19 function only CH -66 6 PINS S7 S69 7 PINS SSCH6-44 SSCH7-44 CH- 66 6 PINS 7 PINS SSCH69-44 SSCH79-44 For 19 function only, and all OverDrive functions. 6 PINS L69 7 PINS CL6-44 6 PINS CL7-44 CL69-44 Follow disassembly directions in reverse. Remove retaining ring from back of core. Plug will slide out from shell. Slide front plate off (down). Remove locking tab from shell. Tip: Hold shell upside down. From front side of shell, insert locking tab through window of shell, fingers of locking tab will then engage with slots on shell. 1 2 3 4 S79 For all functions except 15 and 19 functions L7 1. 2. 3. 4. CH79-44 Q SERIES LEVER HANDLE: CH -66 ASSEMBLY: H79 M, W, Q SERIES LEVER HANDLE: L6 DISASSEMBLE: 7 PINS CH69-44 CH7-44 S SERIES KNOB: S6 CH -66 DISASSEMBLY AND ASSEMBLY OF CORE CH- 66 L79 7 PINS CL79-44 M SERIES KNOB: M6 6 PINS CM6-44 Note: When replacing retaining ring, flat should be on bottom, with opening facing toward locking tab. M7 7 PINS CM7-44 12 13