Download Workshop Manual AC

Transcript
SX Lower Gearcase
remove the anode and clean the mounting screws, the anode and the
area where the anode is installed. Install and retest the anode.
Note! Do not paint or otherwise coat the anodes. This will prevent them from functioning properly. If anode appears to
be corroded on its surface, but is not deteriorating, it
should be replaced.
Specifications
Table 5:
Description
Propshaft bearing housing
U.S.
Metric
200-225 ft. lb.
271-305 N•m
150-160 ft. lb.
203-217 N•m
Anode
60-84 in. lb.
6,8-9,5 N•m
Drain
60-84 ft. lb.
6,8-9,5 N•m
3/8-16
22-24 ft. lb.
30-33 N•m
7/16-14
32-40 ft. lb.
43-54 N•m
Oil level gauge and plug
48-72 in. lb.
5,4-8,1 N•m
Retainer, propshaft bearing housing
20-25 ft. lb.
27-34 N•m
Set screw, propshaft bearing housing
42-60 in. lb.
4,8-6,8 N•m
Shift Linkage Access Cover
108-132 in. lb.
12-15 N•m
Trim tab to gearcase
14-16 in. lb.
19-22 N•m
Nut
Pinion gear
Screw
Lower to upper gearcase
VPA 7743008 07-2003
175