Download Outdoor

Transcript
Transmission Mounts
LG Motorsports Trans & Diff Cooler Package
Bolt to differential to reduce drivetrain shake
(often mistaken for wheel hop) common
in modified Corvettes. Anodized 6061 T6
aluminum. Sold as pair. Add PM-588 engine
mounts for a one-two punch!
Designed to withstand the withering heat generated in dedicated
track cars. Separate coolers for transmission
and differential eliminate unwanted heat
transfer that occurs in factory setup. Key is a
CNC-milled billet aluminum diff cover that
holds a mechanical 2-stage dry sump pump
driven by the pinion. No more having to
remember to turn the pump on – whenever
the car moves, oil flows. Includes differential mounted pump, all
braided lines and AN fittings, pair of Setrab coolers and hardware.
Also available as diff cover/pump only to plumb own system – does
not include coolers, lines, fittings and hardware.
PM-589
05-13
Transmission mounts
450.00
Engine Mounts
Softer factory mounts allow a “rock” that can
result in broken parts in big-power cars.
Anodized 6061 T6 aluminum. Sold as pair.
PM-588
05-13
Engine mounts .........
295.00
SU-1265
SU-1264
05-13
05-13
LG trans & diff cooler package...................... 2,795.95 kit
LG diff cover/pump (only) ............................ 1,695.95
Six ShooterTM Driveshaft Coupler
Prothane has bridged the gap between weak
OE rubber and the potentially damaging
harshness of a solid mount. (Street Corvettes
need a little flex in the driveline to protect
the factory driveshaft from stress.) Machined
billet aluminum with polyurethane inserts.
Sold each. 2 required per car.
SU-1220
05-13
Coupler, 12mm .........
209.95
HD Billet Aluminum Couplers
For hardcore track use – way too unforgiving
for the street. CNC-machined couplers
replace OE rubber pieces for a much stiffer
and stronger assembly. Recommended when
running carbon fiber driveshaft.
SU-1255
05-13
Billet couplers, pair...
309.95
Carbon Fiber Driveshaft
Stronger yet lighter than factory aluminum
driveshaft. Puts an end to
vibration due to bent shaft or
high-rpm “whip” (as carbon
fiber doesn’t change shape).
A safety must for competition
Corvettes. Fits 6-speed manual
transmission only.
SU-1203
SU-1327
05-08
09-13
Carbon driveshaft..... 1,199.95
Carbon driveshaft..... 1,199.95
Z06 6-speed Transmission Upgrade
Exact same close-ratio trans factory installed
in the track-ready Z06. Allows LS2/LS3
6-speed Corvettes to upgrade to heavy-duty
LS7 differential. Includes cooler. Non-Z51
install requires blocking off lines or adding
aftermarket transmission cooler.
T-446
06-13
“Thermal-Abs” Exhaust Tunnel Plate
Exhaust heat radiating up through the console can crimp the fun of
cruising your Corvette.
Elite Engineering’s
“Thermal-Abs” solution
replaces the factory tunnel
reinforcement/heat shield
plate with a beefier 1/4” 6061-T6 aluminum version with a heat
reflecting ceramic coating. Composite fiberglass insulation is bonded
to the underside for cumulative heat reduction of 60+ degrees over
original plate. End result is a stiffer chassis and cooler interior. Uses
OE hardware. GM changed tunnel plate mounting configuration on
‘11-13 Z06/ZR1 – Zip recommends not re-using OE bolts for rear (4)
mounting points due to risk of damaging threaded inserts.
EX-869
BL-635
05-13
11-13
Exhaust tunnel plate reinforcement (ND).....
Z06/ZR1 tunnel plate rear bolt kit ................
299.95
6.95 set
Zip C6 Resto: Transmission
Z06 TR6060 6-speed. 3,295.95
Automatic Control Cable
Replacement for broken or
damaged factory cable. TM-351
fits ‘05 4L65-E 4-speed; TM-346
fits A6 6-speed automatic.
TM-351
TM-346
Z06 differentials have larger ring & pinions and
can be installed in ‘06-13 A6 automatic Corvettes
using Zip’s SU-1207 upgrade kit. ‘06-13 LS2/LS3
6-speed cars can use Z06 diff only if upgrading to
a Z06 transmission. Call Zip tech support for
information about Z06 differential conversions.
05
06-13
TM-351
Automatic transmission cable .......................
Automatic transmission cable, A6 .................
74.95
54.95
F1 Paddle Shift Module
Replaces LH steering wheel-mounted paddle to convert A6 6-speed
automatic to F1-style “either direction” operation in Sport mode.
New GM handle is modified using Zip’s module to dedicate the LH
paddle to press or pull downshifts – RH works same for upshifts.
X-2145
showroom 8:30-5:30 EST weekdays 10-3 Saturday
06-13
F1 paddle shift module ..................................
SHIFTER & DRIVELINE
169.95
61