Download Operator`s Manual

Transcript
SCRUBTEC 770 L, 784 L, 795 L
Common Error Codes
ERROR
CODE
CAUSE
ACTION
3100
3101
3102
3103
3104
3105
Probable short circuit of
output device.
Check the traction, brush and vac motor
connections on the trio and check wiring
from these connectors down to the
traction, brush and vac motors.
7600
Open circuit on brush motors
or brush motor wiring.
Check the brush motor connection on
the trio and check the wiring from this
connector down to the brush motor.
7603
Possible short circuit on
brush motors or wiring.
7800
Open circuit on traction motor.
Check the traction motor connection on
trio and wiring down to motor.
7802
Traction motor current has
exceeded current limit for the
fold back time.
Excessive driving up an incline, or
machine driven up against an obstacle
or step.
9000
Brushes not fitted.
Brushes
2F01
Drive system activated prior
to turning key switch "ON".
Release traverse switch and reactivate.
NOTICE: IF ERROR CODE/FAULT OCCURS TURN KEY SWITCH OFF AND THEN BACK ON.
For further codes and explanations, contact a Nilfisk ALTO Service Center.
Nilfisk ALTO Operator's Manual - SCRUBTEC 770 / 784 / 795
- 29 -