Download Advanced Peinter Driver Ver.5
Transcript
Chapter 5 Restrictions Restrictions This chapter describes the restrictions that apply to the APD. OS Settings 1. When connecting Windows 7/ Vista/ XP to a printer using serial I/F, printing may not operate correctly depending on the computer and printer combination. In such cases, disable FIFO in the Windows COM port detailed settings. 2. With a serial connection, when the OS recovers from a sleep or hibernate status, the printer may print ʺ??.ʺ 3. With some computers, if the ECP mode is set for the parallel operation mode, printing may not operate correctly or Status API may become unavailable. In such cases, clear the ECP mode setting in the computer BIOS setting. 4. With Windows 7/ Vista/ XP, use [Enable advanced printing features] (EMF spool) in the printer driver Properties ‐ [Advanced] tab set to ON. Setting otherwise (RAW spool) applies the following restrictions to the GDI functions: • Raster operation cannot be printed as specified by StrtchBlt()/BitBlt(). • When transferring bit information from display device context to the printer device context using StretchBlt(), the GDI function returns ʺFailureʺ and prevents the driver from printing. 5. When printing multiple pages, if you change the paper orientation from one page to another and/or other settings using ResetDC(), the print result may be incorrect. In such cases, set RAW spool (with Windows XP/Vista, set [Enable advanced printing features] to OFF) although some restrictions apply. See the previous paragraph for the restrictions. 6. When printing a device font in Microsoft Word, the following setting is necessary. 5 • For Word 2003 or earlier: From [Tools] ‐ [Options] ‐ [Compatibility], select ʺMicrosoft Word 6.0/95ʺ in [Recommended Options for] or make a check in ʺUse printer metrics to lay out documentʺ in [Options]. • For Word 2007: From [Word Options] ‐ [Advanced] ‐ [Compatibility Options for], select ʺMicrosoft Word 6.0/95ʺ or ʺCustomʺ in [Lay out this document as if created in], and make a check in ʺUse printer metrics to lay out documentʺ in [Layout Options]. • For Word 2010: From [File] ‐ [Options] ‐ [Advanced] ‐ [Compatibility Options for], select ʺMicrosoft Word 6.0/95ʺ or ʺCustomʺ in [Lay out this document as if created in], and make a check in ʺUse printer metrics to lay out documentʺ in [Layout Options]. 99