Download ACU-100
Transcript
4 Two-way wireless system ABAX ACU-100 1. GENERAL The ACU-100 controller allows communication between any alarm control panel and the ABAX system wireless devices. It enables wire-operated security systems to be expanded by addition of wireless devices. The ABAX system is based on two-way communication. All messages sent by the devices are acknowledged, which ensures that the equipment status information will reach the controller and allows online check of the devices for their presence in the system. Configuration of parameters and testing of the wireless devices is performed by radio, without the need to dismantle their housings. Coded communication between the units takes place within the frequency band of 868.0 MHz – 868.6 MHz. 2. DESCRIPTION OF ACU-100 WIRELESS SYSTEM CONTROLLER The ACU-100 controller supervises and coordinates operation of up to 48 wireless devices. The status of devices is signaled on the OC type outputs. It can also be transmitted to the control panel through the communication bus. The controller settings and wireless equipment parameters are programmed by means of an LCD keypad or a PC computer. 2.1 ELECTRONICS BOARD Fig. 1. Schematic view of ACU-100 controller PCB (version 4.00). antenna. DIP-switch package for setting an individual addresses of the device and to configure some working parameters of the controller (see FUNCTIONS OF DIP-SWITCHES). buzzer. It informs of occurrence of one of the problems signaled on functional outputs (it does not apply to the controller interfacing with the INTEGRA, INTEGRA Plus or VERSA series alarm control panels).