Download fulltext

Transcript
Performance Evaluations of Cisco ASA and Linux iptables Firewall
Solutions
The configuration of IP addresses of different devices is according to the list below
(Table 6).
Device
Port
IP address
Subnet mask
Client (Webbench)
eth0
10.10.10.10
255.255.255.0
Cisco ASA5505
e0/0 (inside)
10.10.10.1
255.255.255.0
Cisco ASA5505
e0/2 (outside)
20.20.20.1
255.255.255.0
Linux iptables
eth0 (inside)
10.10.10.1
255.255.255.0
Linux iptables
eth1 (outside)
20.20.20.1
255.255.255.0
Web server
eth0
20.20.20.20
255.255.255.0
Table 6. IP address table for concurrent sessions test
After finishing the IP setting, open a browser at the Webbench client and type the
link “http://20.20.20.20/” to visit the test webpage as Figure 3.
Open a terminal window in Webbench client and type “webbench -c 500 -t 10
http://20.20.20.20/” to make a short test to verify the Webbench is working well. It
shows thousands number of request succeed and 0 failed, the system is ready for the
concurrent session test.
3.3.3
The limitation in concurrent sessions test
The Webbench software supports to generate up to 30,000 concurrent sessions. The
Nginx web server software supports to establish up to 50,000 concurrent sessions
requests. However in this test the main limitation is that the webbench server (DELL
laptop LATITUDE D630) can only generate the maximum 15,000 clients requests
which depends on its hardware performance.
31