Download REA PC-Scan with Laser Device Barcode measuring device User`s
Transcript
Rationalisierung Entwicklung Automation Elektronische Geräte und Systeme 3.6 REA Elektronik GmbH Test equipment monitoring The REA PC-Scan is always supplied with a test code on photographic paper. This test code is affixed to a DIN-A4 sheet. The permissible tolerances of the device are also specified on this DIN-A4 sheet. The sheet also describes how the measurement results are related to national standards. A verification report on the test code is also provided, which has been produced from the enclosed test code by an REA PC-Scan reference device. The test code should be measured once per month and the results compared with the results on the reference report. If the deviations become greater than the permissible tolerances, this means the device requires maintenance. In the simplest case, it may only be necessary to clean the calibration fields (as described in section 3.4). The test code must be stored protected from light. Scratches, marks and other damage must be avoided. REA Elektronik GmbH guarantees a working life of 2 years for this test code, provided that the handling instructions are followed. © REA Elektronik GmbH REA PC-Scan -October 2005 Page 19 of 133