Download VPrep User Guide

Transcript
Chapter 7: System Configuration
I/O Configurations
** CAUTION ** Do not change the port settings from the factory default.
The port settings are for manufacturer’s use only (see Figure 67). Settings must
not be changed from the factory default.
• Shelf actuation port
• Vacuum output port
• Vacuum sensor port
The user may wish to individually disable the shelf sensors. If this is done, be sure
the open loop shelf travel time feature in the shelf settings in the pipettor profile
contains a valid time.
Command
Function
Shelf in sensor
Enables the shelf in sensor for the specified shelf.
Shelf out sensor
Enables the shelf out sensor for the specified shelf.
Figure 67
91