Download Video Projector
Transcript
Charging the 3D Glasses 4 Use the provided USB charging AC power adaptor to charge your 3D glasses. Connect the AC power cord for USB charging AC power adaptor to the supplied USB charging AC power adaptor. AC power cord for USB charging AC power adaptor Caution Projecting Connect the USB charging cable supplied with the unit, to the supplied USB charging AC power adaptor only. Using any other connector may cause fire, a rise in temperature or damage to the cable and glasses. 1 Turn off the power of the 3D glasses. 2 Open the 3D glasses cover and connect the USB charging cable supplied with the unit. Open the cover. 5 Plug the AC power cord for USB charging AC power adaptor into an AC outlet. Charging starts. The LED indicator on the 3D glasses lights up in orange while the glasses are being charged. (After charging finishes, the LED indicator turns off.) Precautions about USB charging AC power adaptor Supplied USB cable 3 Connect the USB cable to the USB connector of the supplied USB charging AC power adaptor. Supplied USB charging AC power adaptor Installation Do not place the USB charging AC power adaptor in a location where it is: • Subject to extreme high temperature (E.g., in a car with its windows closed) • Subject to direct sunlight or near a heat source • Subject to mechanical vibration or shock Operation • To prevent damage, be careful not to drop or otherwise cause a mechanical shock to the unit. • After using, disconnect the unit from the AC outlet and the equipment. • Disconnect the unit from the AC outlet by pulling on the plug. Do not pull on the cord. • To avoid short-circuiting, do not allow the terminals of the USB charging AC power adaptor or connector to touch any metal object. 21