Download DX-TL308E DX

Transcript
Notice
When the total FPS of all the recordings being
performed is around the following values, they may not
be performed according to the specified settings.
Step
When the total FPS is around the following values, you
cannot view images from the inactive cameras via the
network.
Picture size
4CIF
2CIF
CIF
<DX-TL308E>
50
100
200
<DX-TL304E>
25
50
100
10Select recording cameras for each connected
sensor.
•
Alarm recording is performed with selected cameras.
•
When an alarm signal is input during normal
recording, images from cameras selected for alarm
recording are recorded at the alarm recording
FPS rate while images from the other cameras are
recorded at the normal recording FPS rate. The
maximum total of the alarm recording FPS and
normal recording FPS of the selected cameras is as
follows.
Tips
•
<Estimated time>
•
•
•
[Estimated time] is displayed at the bottom of the
screen, which shows the maximum continuous
recording time at the picture quality and FPS for
normal recording.
•
4CIF
2CIF
CIF
<DX-TL308E>
50
100
200
<DX-TL304E>
25
50
100
4CIF
2CIF
CIF
50
100
200
<DX-TL304E>
25
50
100
Alarm input to 3ch
1ch
2ch
3ch
4ch
The estimated time is just for a guide. Depending
on the recorded images, the actual recording time
may vary considerably. As more motion images are
recorded, the actual recording time may become
shorter than the estimated time.
Picture size
Picture size
<DX-TL308E>
Alarm input to 1ch
When you change the capacity of the normal
recording area in the partition setting, the estimated
time is displayed according to the specified capacity.
• When the sum of each FPS is around the following
values, [Total FPS] is displayed in red and an error
message appears. In this case, decrease the FPS.
ENGLISH
•
Alarm camera setting
•
Nomal recording
Alarm recording
Nomal recording
Nomal recording
Nomal recording
Alarm recording
Nomal recording
Nomal recording
When the setting is completed, select [Next]. The
<Alarm input/output> screen is displayed.
Tips
•
You can select multiple cameras per sensor input.
[Total FPS] shows the sum of the larger values
between the FPS for normal recording and that for
alarm recording of the selected cameras. (The value
displayed in [Total FPS] is not same as the sum of the
displayed FPS.)
Recording
53