Download Help 3Muri

Transcript
Analysis
101
Maximum iteration no.: represents the maximum number of analysis steps that the solver
must perform before stopping the computation if no convergences are found.
Control node options: definition of a control node is obligatory for computation. It is
recommended that the node is chosen in correspondence with the highest level of the
structure.
· Control node displacement: the capacity curve are drawn only with the control node
displacement.
· Average displacement: the capacity curve are drawn with the average displacement of
all level's nodes.
· Weighted average displacement: the capacity curve are drawn with the weighted
average displacement (mass weighted).
If the floors are considerate rigid, this value is the same with the barycentre
displacement.
Level average reference node: Identifies the possibility to perform predictive calculations
to draw the bearing capacity diagram with reference to the value of the average
displacement of the level.
This window performs multiple analyses in distinct cascades, for direction, orientation,
type of seismic load, and eccentricity.
Direction: indicates the earthquake direction.
Orientation: positive if in concordance with the positive direction of the axis examined.
Seismic load: Proportional to the mass or the first node to vibrate.
Eccentricity: Accidental eccentricity of the center of mass with respect to the rigidity
center computed automatically according to the code.
Using the associated space, multiple analyses can be performing by activating the
selection filters.
In the left part of the window, the code to be used can be selected.